Delamere with Four-Way Top
Gisburn with Four-Way Top
Sherwood Single Bevel
Hepburn Four-Way
Delamere with Reflective Band
Optional Reflective Panels
Optional Internal Lighting
Optional Reflective Bands
Optional Information Plaques
Timber Bollard Profiles
Square Timber Bollard Top Styles
Square / Rectangular Bollards
- Bollards from our standard design range are available in various sizes of round, square or rectangular cross section.
- A wide range of standard lengths make it easy to select the best one for your situation, but non-standard or special lengths can be manufactured to suit customer needs.
- The most popular styles have been selected to create our standard, all of which can be finished with a choice of decorative profiles.
- If you can't see a design you like please contact our sales office to discuss your requirements.
- Bollards are manufactured from hardwoods originating from certifiable, sustainable sources and selectively treated English softwoods.
- Bollards are normally supplied untreated but are suitable for the application of most commercially available stains and timber treatments.
- Standard bollard lengths quoted refer to the overall length of the bollard. We recommend that bollards are installed with at least 30% of the above ground height below ground level.
- Where circumstances will not permit the digging of suitable deep holes or poor ground conditions must be considered, a range of special base options and bollards are available.
Product Options
| HSF211000 | Sherwood Square - No. of grooves: 0 |
| HSF212000 | Delamere Square - No. of grooves: 1 |
| HSF213000 | Gisburn Square - No. of grooves: 2 |
| HSF214000 | Kilburn Square - No. of grooves: 3 |
| HSF215000 | Hepburn Square - No. of grooves: 2 |
| HSF231000 | Sherwood Rectangular - No. of grooves: 0 |
| HSF232000 | Delamere Rectangular - No. of grooves: 1 |
| HSF233000 | Gisburn Rectangular - No. of grooves: 2 |
| HSF234000 | Kilburn Rectangular - No. of grooves: 3 |
| HSF235000 | Hepburn Rectangular - No. of grooves: 2 |
Product info
Styles and Sizes
Standard sizes for Square bollards:
- 100mm
- 150mm
- 175mm
- 200mm
- 225mm
Standard sizes for Rectangular bollards:
- 100 x 50mm
- 150 x 75mm
- 200 x 100mm
Standard overall lengths:
- 600mm
- 800mm
- 900mm
- 1200mm
- 1350mm
- 1500mm
- 1800mm
Mounting Options
Steel Footplate Mounting
Where depth must be restricted to avoid underground services or other obstructions, bollards can be supplied at a reduced length with a galvanised steel footplate attached. This design is particularly suited to paved areas where the footplate can be attached to an existing or new concrete base.
Removable/Hinged Bollards
Removable or hinged bollards are available where intermittent vehicle access is required. These are provided with a lockable socket in galvanised steel.
For Use on Highways
Optional Features:
- Tubular Handrailing
- Fitted Eyebolts and chain in stainless or galvanised steel.
- Marine quality padlocks.
- Reflective banding, highways approved 'Class 1'.
- Internal lighting.
- Engraved logos or pre-printed signs and plaques.
- Steel footplates for paved areas.
- Hinged bases or sockets for removable bollards.
- Information screen printed plates can be recessed into the side of the bollard to customers' requirements.
Products
