Clarendon Seat
Clarendon Single Post
Clarendon DA seat
Dimensions - Ground Fixed
Standard Colour Options
Clarendon Seat
Clarendon Single Post
Clarendon DA seat
Dimensions - Ground Fixed
Standard Colour Options

Clarendon Seat

  • All steel fully welded seats have tubular legs or a single post mounting attached by tamper resistant bolts.
  • The seat can be supplied with or without arms.
  • It has a Street-Tough finish in dark green, BS14C40 as standard.
  • It is ideal for both town centres or parks and gardens.
  • See below for Installation Instructions.
Read more...

Product Options

HSF943610Clarendon Seat Single Post
HSF943630Clarendon Seat Surface Mounted
HSF943640Clarendon Seat with Armrests Single Post
HSF943660Clarendon Seat with Armrests Surface Mounted
HSF943670Clarendon DA Seat with Armrests Single Post
HSF943690Clarendon DA Seat with Armrests Surface Mounted
HSF943720Galvanised Ground Fixing Extensions - 225mm
HSF943730Galvanised Ground Fixing Extensions - 400mm

Clarendon Seat

  • All steel fully welded seats have tubular legs or a single post mounting attached by tamper resistant bolts.
  • The seat can be supplied with or without arms.
  • It has a Street-Tough finish in dark green, BS14C40 as standard.
  • It is ideal for both town centres or parks and gardens.
  • The DA seat design has a facility to provide disabled access by moving the arms, and adding extra arms. There is an option with an inset arm, which enables a reasonably ambulant wheelchair user to share with other occupants on the seat.
  • Supplied with extended legs or single post mounting (SPM) (for concreting in), as standard.
  • Available with either pedestal base legs (for bolting down), or ground anchoring version.
  • Pedestal base option can be bolted down with rawl bolts.
  • Supplied partially assembled, with legs to bolt on.
  • Optional Finishes:
    • Acrylic Coating available.
    • Eleven other standard colour options (at no extra cost).
    • Available in any other BS or RAL colour at an extra cost.
  • Dimensions:
    • Slats 30 x 50 x 2mm hollow
    • Cradle frames 50 x 12mm flat
    • Legs 76 x 3mm or 140 x 5mm (for SPM) circular hollow.
    • Length: 1800mm
    • Weight: approx. 80kg.

Installation Instructions

1. Fixing Kit 1 - Rawl bolts

Pedestal base seats can be rawl bolted to an existing surface of sound concrete, or well laid traditional size concrete or stone slabs, using these M10 rawl bolts. 

This method is not normally suitable for installing seats onto small block pavers.

Fixing kit 1: rawl bolts


2. Fixing Kit 2 - Extended rawl bolts and spacers

For the installation of pedestal base seats onto small block pavers, typically 60mm thick, we recommend either  the M10 x 180 extended rawl bolts, or M12 x 240 extended rawl bolts, with semi collapsible spacing tubes.

The spacing tubes hold the rawl bolt shell in the concrete (which must be laid beneath the pavers) whilst the bolt is tightened.

It is recommended that the pavers in the area of the seat are bedded on top of the concrete using a semi dry sand cement screed about 20mm thick.

These kits are also suitable for fixing seats onto surfaces of bituminous macadam, laid on top of concrete.

The bolts in these options are stainless steel.

Fixing Kit 2 - Extended Rawl bolts


3. Fixing Kit 3 - Galvanised ground fixing extensions

These extensions have the advantage of offering a very strong and permanent installation. This means of fixing is suitable for grassed areas, small block pavers and macadam surfaces.

The extensions are bolted to the feet of the seat and then accurately positioned in the concrete bedding, using the seat as a template. After the concrete securing the extensions has set, the seat is removed, and the final surface is laid to the tops of the extensions. The seat is then returned to the site and finally bolted down.

All the bolts in these options are stainless steel. The options are 225mm long, and 400mm long socket cap head bolts.

Fixing Kit 3 - Galvanised ground fixing extensions